{"id":3247,"date":"2014-12-04T12:10:53","date_gmt":"2014-12-04T12:10:53","guid":{"rendered":"http:\/\/mfgtechupdate.com\/?p=3247"},"modified":"2014-12-04T12:10:53","modified_gmt":"2014-12-04T12:10:53","slug":"haimer-safe-lock-system","status":"publish","type":"post","link":"https:\/\/mtuupdate.in\/mtu\/2014\/12\/04\/haimer-safe-lock-system\/","title":{"rendered":"Haimer Safe-Lock\u2122 System"},"content":{"rendered":"

High performance machining (HPM) of difficult to machine materials places enormous demands on tool holding. Therefore, the order of the day always includes the fact that a slow micro-creeping movement takes place and the tool is pulled out of the chuck due to the high degree of axial forces.
\nEven frictional clamping methods with extremely high clamping forces can often not prevent micro-creeping. Thus, high quality work pieces become scrap.
\nAs a consequence, the cutting data on the machine tool is often reduced. Therefore the maximum performance limits of the machine and tools is not completely taken advantage of; machining is ineffective.
\nThe Safe-Lock\u2122 System offers help<\/strong>
\nIn the Safe-Lock\u2122 System, special drive keys in the chuck and grooves in the tool shank prevent the milling cutter from spinning during extreme machining or that it is pulled out of the chuck.
\nIn addition to the frictional clamping forces of the particular clamping system, the tool is held using positive locking in the tool holder through the constructive design of the Safe-Lock\u2122 System.
\nThe combination of pull-out protection and best runout accuracy lead to a low vibration and as a result very efficient machining.
\nDue to the increased cutting depths and feeds, the metal removal rate can be increased by up to 100%, and to a similar degree tool wear decreases due to the excellent runout characteristics.
\nOn the safe side with Safe-Lock\u2122:
\nFor High Performance Cutting (HPC)<\/strong><\/p>\n